Follow this guide to quickly set up IPSec VPN for a Securepoint NextGen UTM Firewall. We cover VPN gateway configuration, user authentication, firewall rules, and connecting from Mac or iOS devices using VPN Tracker 365.

IPSec VPN for a Securepoint NextGen UTM Firewall: Guide Overview

• About Securepoint NextGen UTM Firewall
• Requirements & Checklist for IPSec VPN Setup
• Step 1: Configure VPN Gateway on Securepoint UTM
• Step 2: Set Up User Authentication
• Step 3: Configure VPN Tracker 365 Client

About Securepoint NextGen UTM Firewall

The Securepoint NextGen UTM firewall provides enterprise-level network security with built-in IPSec VPN support. Remote users can securely access your network without complex setup, making it ideal for small and medium businesses.

Requirements & Checklist for IPSec VPN Setup

Before configuring your IPSec VPN connection, ensure you have:

• Public WAN IP or Dynamic DNS hostname
• Securepoint UTM connected to the internet
• Configured LAN network (check with your network administrator if unsure)

Step 1: Configure VPN Gateway on Securepoint UTM

1. Add a New VPN Connection

• Log in to the UTM web interface.
• Navigate to VPN > Connections.
• Click + Add to create a new VPN connection.

2. Select Connection Type

Choose Roadwarrior for individual remote users.

3. Configure General Settings

Enter a connection name, select IKEv1 or IKEv2, and use Pre-Shared Key authentication.

4. Define Network Settings

Set the VPN IP pool and specify internal networks accessible to VPN users.

Step 2: Set Up User Authentication

5. Create VPN User Groups

Create a group named "VPN_Users" and enable IPSec XAUTH authentication.

6. Add VPN Users

Add users to the VPN group and securely store their credentials.

7. Configure Firewall Rules

Allow IPSec traffic and ensure VPN clients can reach the required internal networks.

8. Apply Settings

Save the configuration, restart the VPN service, and verify the VPN gateway is active.

Step 3: Configure VPN Tracker 365 Client

Connect from Mac or iOS devices using VPN Tracker 365:

9. Create a New VPN Connection

Open the VPN Tracker Connection Creator for Securepoint NextGen UTM Firewalls.

10. Configure Connection Parameters

• Address: Enter the VPN Gateway IP or hostname
• Remote Networks: Define the networks to access via VPN
• Authentication: Input the Pre-Shared Key and user credentials

Your Securepoint IPSec VPN connection is now ready for Mac, iPhone, and iPad via VPN Tracker!

    Connect to Securepoint VPN